Saturday, March 7, 2015

Two Colour Eider Duck Linocut

Eider duck linocut
Eider duck linocut
I've just finished printing an edition of eider ducks linocut prints.  They were inspired by the eider ducks we saw while on holiday in Gardenstown.
Gardenstown is a beautiful village up in the North East of Scotland.  It's a fishing village built right on the sea.  It's a perfect place to visit as a family as it's almost car free and the beach is practically at your front door!  Lots of seabirds live there, including a population of eider ducks.

Gardenstown is built right on the sea!
Gardenstown is built right on the sea
Gardenstown harbour
Gardenstown harbour

gannet colony
There is a large gannet colony nearby
MacDuff Aquarium
At the MacDuff Aquarium

I decided to produce a simple two colour linocut.  I love the technical challenge of reducing what you would like to portray down to 4 colours: the colour of the paper; the 2 colours of each separate linocut panel; and the 4th colour where the panels overlap.

First panel inked up in black
First panel inked up in black

 1.  Here you can see my first linocut panel, which is printed up in black.

Second panel inked up in blue
Second panel inked up in blue

2.  I made a second panel, which I printed up in a grey-green blue.  You can see clearly in this photograph the overlap of colours, where there are ripples on the water.

3.  The edition of eider ducks prints drying off on the rack.  They are printed on to very beautiful but very fragile rice paper, so you need to stretch them out carefully.

Eider duck prints drying off
Eider duck prints drying off

Monday, March 2, 2015

Beautiful Things of Utility! Part 1 - Printed, drawstring bags

Over the last few weeks, I've been using the excuse of tidying up Estelle's room to make different things which are both beautiful and useful!  Below you can see the drawstring bags I've been making by printing on fabric.

Drawstring bags
Drawstring bags using some of my illustrations
Duckling drawstring bag
Details of the duckling design
Duckling drawstring bag reverse
Reverse side of the duckling bag

Panda bag
Close up of panda bag.

Dachshund drawstring bag
Dachshund drawstring bag
I would like to show you how to make the dachshund drawstring bag shown here on your left.  

I am going to show you how I print onto fabric using a computer printer - but please note, if you would like to do this, you are doing this at your own risk!

All of the illustrations you see here are available to buy through the Three Bears Prints Etsy shop.  Here's the link to my shop:
Three Bears Prints Etsy Shop
You can find the panda, ducklings and dachshunds in this section of my shop.

Apply spray mount onto card
1.  Spray mount onto card.

1.  First of all, you will need to work out your design and the measurements for your bag. I use Photoshop.

I used Photoshop to come up with an oblong dachshund design measuring 16cm x 48cm.  The measurements of my canvas was 26 x 64cm so that I had lots of space for seam allowances.

I cut a piece of card measuring 26 x 64cm.  (I am lucky enough to have a printer which can up to 32 x 67cm.)

I put newsprint down to protect my table, and applied spray mount to the whole of the piece of card.

Smooth fabric over sticky card.
2.  Smooth fabric over sticky card.
2.  Cut your fabric (and use fabric which is fairly thin) a little bigger than your card.  Iron it then carefully smooth it over the card.

 Perfectly smooth surface.
4.  Perfectly smooth surface.
Trim fabric
3.  Trim fabric.
3.  Use a metal rule and very sharp craft knife to trim the fabric.

4.  This produces a flat, perfectly trimmed surface on which to print.

Printing the fabric
5.  Printing the fabric
5.  You can now print your design.  Make sure you set up the print options correctly - so for me, I have to choose custom print and put in the size of the card, and set it to 'high quality' printing.  

Depending on what I'm printing, I will also increase the contrast, and decrease the brightness of a design, to compensate for the light fabric.

Carefully feed the fabric cover card in, and watch it as it feeds through the printer, to make sure it doesn't jam.

Close up of printed fabric
6.  Close up of printed dachsies

6.  You can see that you can print really high quality, detailed images!
At this point, I would waterproof my fabric by spraying the same protector on them such as you would use to protect canvas bags and shoes.

I'm a fairly novice sewer, but drawstring bags are easy.  I looked at this blog post for some instructions: 

To summarise, you sew the edges, leaving a gap where the string (or in my case, ribbon) will go...
Sew round hole for string
Sew round hole for string

Sew the edges of the bag leaving gap for string
Sew the edges of the bag leaving gap for string

...then you open up the edges and sew around the hole for the string...

Create channel for string
Create channel for string
Thread through string
Thread through string - or ribbon
....turn over the top of bag to create channel for the ribbon... turn it the right way, and using a large safety pin, thread through the ribbon.

dachshund drawstring bag
The finished dachshund drawstring bag!