Dragonfly Collograph Print

Dragonfly Collograph

I've been wanting to experiment with creating collographs for a while using my press, and I decided to make a dragonfly themed collograph as I thought this would be a good opportunity to experiment with different textures on a watery background.  I've only ever made one collograph before, and certainly not this complicated, so I really was feeling my way with this.  I'm in no way an expert!  But I'm really delighted with how it turned out...

here's a detail of part of the collograph.

Part of Dragonfly Collograph

So here's how I did it:

1.  Laying out the background reeds

I started off by cutting a piece of mount board to size.  I gathered some dried reeds to make the background.  I stuck them to the mount board with lots of Marvin Medium.

2.  Creating the dragonflies

As you can see, I decided to make the dragonflies out of pieces of card, with textured paper for the eyes, and lace fabric for the wings.

3.  Board painted white

Once everything was in place, I coated it with 2 layers of Marvin Medium to make sure everything was stuck down firmly, and then painted it white so I would be able to see the inks better.

4.  Inked up plate

5.  Close up of inked plate

Above you can see the plate once it had been inked up.  I used two colours to ink it up, using oil based inks.  I used a grey ink, which I firmly rubbed into all the details using a scrap cloth.  I then wiped off the excess, and used a blue colour over the plate.  

6.  Inked up paper

Above you can see how this turned out - you can see the layers of grey and blue.  Below, you can see that I  also experimented with using a paint brush to paint in the dragonflies bodies' in pink.  I decided I preferred the simpler blue and grey version.

7.  Inked up paper with pink

So far, pretty unimpressive....but the results are TRANSFORMED when you paint up the inked paper with water soluble inks.  As you can see from the finished print below, the oil based inks show through the water based inks,  The finished print is rich in texture and the colours really sing.  I'm delighted with the detail of the reeds and the wings of the dragonflies.  I'll definitely be experimenting further with collographs!

8.  The finished dragonfly collograph print

If you'd like to buy download versions of this print, have a look at my Etsy shop on:
http://etsy.me/1wVdk8a.

Texture in Linocuts

It is important to make use of texture in linocuts, especially if it is a one colour linocut.  Texture adds interest and realism.  You can create texture by using different sized tools.  All of my Calendar of Scottish Wildlife prints make use of texture to make the animals more life-like.  In the bats example below, you can see I’ve used a small tool to create the fur; and a broader tool for the grain of the wood.



Texture adds realism to this linocut of bats

The amount of texture you add can lead to a variation of shades of colour, and this can help to differentiate between areas. Look at the ‘Sleeping Rabbits’ print below which incorporates three different shaded areas. 



1.  The light hay, where only the thinnest lines have been left behind. 

2.  The mid tone rabbits where a thin tool has been used to create lots of short lines to give the impression of fur. 

3.  Finally, there is the almost solid, very dark earth, where the only texture is the occasional stone.



Variation in texture creates different shades of the same colour in this rabbit linocut

In creating texture, it is important not to over cut and clear out too much.  With my 2011 Christmas Bears card below, for example, I feel I was a bit over zealous in creating lines for the fur of Mummy Bear – I think she looks a bit bald compared to the others!

Be careful not to remove too much - poor balding Mummy Bear!

In creating a colour linocut, it is also important to add texture.  It can make a single area of colour lighter or darker, helping to describe the surface area and solidity of the subject.  Look at the grey section of the gannets below.  The solid grey in the beaks show how strong they are.  The textured grey highlights their feather and changes into a solid grey, to show the shaded areas.

Texture in the grey area shows the feathers in this gannet linocut.

Enjoy using your tools to create different textured effects in your linocuts!

How to make a repeat pattern

In this post, I want to show how I create a linocut which can be put together to form a repeat pattern.  This kind of linocut needs to work in design terms both on it's own, or as part of a repeat pattern. I'm going to go through the design process for the first ever repeat pattern I produced, my dachshunds.

Dachsund linocut - repeat pattern

1.  Firstly, you have to choose the element(s) which will form the corners and edges of your linocut.  You will be cutting these into 4, so you will need to think about how these will look once they have been cut into sections.  Do you want the sections to look fairly abstract or still recognisable?  For me, this is the best bit of creating a repeat pattern – the challenge of cutting your subject matter up and making decisions as to how you want these parts to look.  Here's the dachshund which will form my corners.

Step 1 - Decide on image which will form borders and corners

2.  Cut it into four.

Step 2 - Cut into four

3.  Label them.

Step 3 - Label the sections

4.  Arrange these quarters as shown.  It is important that they are laid out in this sequence so they match up when the final print is grouped with other prints, they match up.

Step 4 - Arrange the sections into corners/edges

5.  Compose the remainder of your linocut around these corner and edge elements.  

Step 5 - Design the rest of your linocut around these sections

6.  Make sure the linocut looks balanced, both as a single piece and as a repeat pattern.  To do this, you will need to be aware of the amount of background space in your print.

Single dachshund linocut print

Dachshund linocut print as repeat pattern

Here is the same process for the hen design I created for Gloagburn Farm.

Step 1 - Drawings of hens which will form edges

1.  I started with drawings of the two hens I knew I wanted to cut up to form the edges of the design.

Step 2 - Hens cut into sections and placed along edges

2.  I cut these into sections and moved these into the correct place.  I wanted to make them look a bit more natural than the dachshunds, as though it was a cross section of a flock of chickens, so I placed them along the edges rather than quartering them and putting them in the corners.

Step 3 - Filling in the rest of the hen design

 3.  I created the rest of the design around these elements.  I tried to show the hens in a variety of poses, and made sure that their sizes were consistent.

Single hen linocut print

4.  The finished linocut as a single print.  Again, you have to be aware of the solid areas and the unfilled background, both as a single print....

Hen linocut print as repeat pattern

5.  ...and as a repeat.  You need to make sure it works both as a single print and as a repeat pattern.

Hope you enjoy experimenting with repeat patterns!